7 Chakras Natural Resin Incense 30g – Meditation & Energy Cleansing Blend

Goloka have been creating quality incense for over 16 years and part of their proceeds are given to charitable causes that help to provide meals for under-privileged children and providing vocational training and scholarships.

HOW TO BURN INCENSE:
Place a self-igniting charcoal disc on a fire-proof surface, well away from flammable objects. The charcoal disks can be ignited simply by holding a match or lighter to the rim. Be aware that these discs may occasionally spit and sparkle profusely upon ignition. Allow plenty of air to flow around the charcoal to ensure that it burns evenly. Some people prefer to open the window while the charcoal is igniting as it gives off quite a bit of smoke. Once the charcoal disc has finished sparkling it will start to glow, usually first on one side, then slowly spreading over the whole disc. When the entire disc is glowing red hot it is ready to use and you can place a little pinch of incense on top. As the disk glows through, the fire will concentrate in its centre. You may occasionally want to scrape off the ashes to expose the glowing centre and add fresh incense as desired.

CARE FOR YOUR INCENSE:
Incense keeps well and often improves with age if kept in a cool and dark place. Charcoal, on the other hand, does not, as it has a tendency to absorb moisture from the air. Once the packet has been opened, keep it in an airtight container to preserve its self-igniting properties.
CAUTION
Keep incense and charcoal out of pet's and children's reach. Charcoal discs are highly flammable. PLEASE BE CAREFUL when igniting your charcoal disc. Once the disc has been lit do not touch it, as it will cause a burn. Make sure your incense dish is fire proof and does not conduct heat to the surface on which it stands. Glass (even glass ashtrays) will break. Do not dispose of the remaining ashes in a waste paper bin or plastic garbage bin as it may cause a fire. Do not hold the disc in your hand while lighting or burning.

How do you use gum resin incense?

Prepare a Heat Source: You'll need a heat-resistant container, such as an incense holder, or a charcoal burner specifically designed for resin incense. If you're using a charcoal burner, make sure it's on a stable surface and away from flammable materials.

Charcoal Incense Disc: If you're using a charcoal burner, place a charcoal disc on the burner. Light the edge of the charcoal disc until it starts to spark and crackle. Allow it to fully ignite and turn gray. This process may take a few minutes.

Add your particular Gum Resin Incense: Once the charcoal disc is fully ignited and has a layer of gray ash on top, you can start adding the myrrh resin. Use tongs or a spoon to place a small amount (usually a pinch or a few granules) of myrrh resin onto the hot charcoal.

Enjoy the Aroma: As the incense resin heats up, it will release a fragrant smoke. Enjoy the calming and aromatic atmosphere created by the burning incense.

Safety: Always exercise caution when working with burning materials.

Keep the burner away from children and pets, and ensure good ventilation in the room.

Allow the charcoal and resin to cool completely before disposing of any ashes.

Myrrh incense, like frankincense, Copal, Sandalwood, all have a rich history of use in religious and spiritual rituals. It is also known for its potential therapeutic properties and is used in aromatherapy.